JR Inkjet Universal Zap-It is required for some Epson cartridges that contain 'Intellidge' Chips. The Zap-It will Reprogram the Intellidge Chip to show a full ink level once the cartridge has been refilled. The Zap-It kit is required when refilling the following Epson printer cartridges:

• Epson Stylus Colour: 680, 685, 777, 777i, C50, C60
• Epson Stylus Photo: 780, 780EPX, 790, 810, 820, 830, 870, 875, 875DC, 890, 895, 915, 925, 950, 1270, 1280, 1290, 2000P, 2100, R300
• Epson Stylus: C42, C44, C60, C62, C64, C70, C80, C82, C84,R200,R300,R800

How to use the Zap-It

1. Hold the Zap-It, so that the two (green & red) lights are facing upwards.
2. Turn the cartridge upside down so that the outlet holes are also facing upwards.
3. Locate the cartridge into the appropriate slots of the Zap-It. This should locate the prongs from the Zap-It against the chip. (You will need to use the L shape lug, which detaches from the Zap-It for the C70, C80, C82 & 5200).
4. Push the cartridge and the Zap-It together.
5. Both lights will flash once simultaneously, then the green light will flash five times to show that chip is reprogrammed.
6. If the red light flashes it may mean either, the prongs are not in line with the chip, or the cartridge you are reprogramming is not an original Epson or a Compatible.
7. You may now proceed with refilling your cartridge as per instructions in your refill kit.